Dodge 2001 Ram 1500 Owner's Manual page 1877

21 - 242 AUTOMATIC TRANSMISSION - 42RE
PLANETARY GEARTRAIN/OUTPUT SHAFT (Continued)
(5) Install assembled rear planetary and annulus
gear on output shaft (Fig. 200). Verify that assembly
is fully seated on shaft.
(6) Install front thrust washer on rear planetary
gear (Fig. 201). Use enough petroleum jelly to hold
washer on gear. Be sure all four washer tabs are
seated in slots.
(7) Install spacer on sun gear (Fig. 202).
(8) Install thrust plate on sun gear (Fig. 203). Note
that driving shell thrust plates are interchangeable.
Use either plate on sun gear and at front/rear of
shell.
Fig. 199 Assembling Rear Annulus And Planetary
1 - REAR ANNULUS GEAR
2 - TABBED THRUST WASHER
3 - REAR PLANETARY
Fig. 200 Installing Rear Annulus And Planetary On
Output Shaft
1 - REAR ANNULUS AND PLANETARY GEAR ASSEMBLY
2 - OUTPUT SHAFT
Gear
Fig. 201 Installing Rear Planetary Front Thrust
Washer
1 - FRONT TABBED THRUST WASHER
2 - REAR PLANETARY GEAR
Fig. 202 Installing Spacer On Sun Gear
1 - SUN GEAR
2 - SUN GEAR SPACER
Fig. 203 Installing Driving Shell Front Thrust Plate
On Sun Gear
1 - SPACER
2 - SUN GEAR
3 - THRUST PLATE
BR/BE