Dodge 2001 Ram 1500 Owner's Manual page 1993

21 - 358 AUTOMATIC TRANSMISSION - 44RE
AUTOMATIC TRANSMISSION - 44RE (Continued)
Overdrive clutch
Line pressure (at
accumulator)
Front servo
Rear servo
Governor
DESCRIPTION
Fitting, cooler line at trans
Bolt, torque convertor
Bolt, clevis bracket to crossmember
Bolt, clevis bracket to rear support
Bolt, driveplate to crankshaft
Plug, front band reaction
Locknut, front band adj.
Bolt, fluid pan
Screws, fluid filter
Bolt, oil pump
Bolt, overrunning clutch cam
Bolt, O/D to trans.
Bolt, O/D piston retainer
Plug, pressure test port
Bolt, reaction shaft support
Locknut, rear band
Bolt, valve body to case
Sensor, trans speed
Screw, solenoid wiring connector
Screw, solenoid to transfer plate
Bracket, transmission range sensor mounting
Screw, transmission range sensor to
mounting bracket
PRESSURE TEST
Fourth gear only
Closed throttle
Third or Fourth gear only
1 range
R range
D range closed throttle
TORQUE SPECIFICATIONS
Pressure should be 469-496 kPa (68-72 psi) with
closed throttle and increase to 620-896 kPa (90-130
psi) at 1/2 to 3/4 throttle.
372-414 kPa (54-60 psi).
No more than 21 kPa (3 psi) lower than line pressure.
No more than 21 kPa (3 psi) lower than line pressure.
1103 kPa (160 psi) at idle, builds to 1862 kPa (270 psi)
Pressure should respond smoothly to changes in mph
and return to 0-7 kPa (0-1.5 psi) when stopped with
transmission in D, 1, 2. Pressure above 7 kPa (1.5 psi)
at stand still will prevent transmission from
N·m Ft. Lbs.
18
31
47
68
75
17
34
17
4
20
17
34
17
14
20
41
12
27
4
4
34
3.4
at 1600 rpm.
downshifting.
In. Lbs.
13
270
35
50
55
13
25
13
35
15
13
25
13
10
15
30
100
20
35
35
300
30
BR/BE