Dodge 2001 Ram 1500 Owner's Manual page 2545

21 - 910 TRANSFER CASE - NV241HD
TRANSFER CASE - NV241HD (Continued)
Fig. 63 Input Bearing Retainer Installation
1 - FRONT CASE
2 - INPUT BEARING RETAINER
(8) Apply Mopar
input retainer bolts. Then install and tighten bolts to
27-34 N·m (20-25 ft. lbs.) torque.
MAINSHAFT
(1) Install drive sprocket on mainshaft (Fig. 64).
Fig. 64 Drive Sprocket Installation
1 - MAINSHAFT
2 - DRIVE SPROCKET
(2) Install brass stop ring on drive sprocket (Fig. 65).
(3) Install 3 synchronizer struts and 2 springs in
hub as follows:
(a) Insert first strut in hub (Fig. 66). Strut
shoulders rest (and slide) on sides hub slot as
shown.
Silicone Sealer to threads of
Fig. 65 Synchronizer Stop Ring Installation
1 - BRASS STOP RING
2 - DRIVE SPROCKET
Fig. 66 Installing First Synchronizer Strut And
1 - FIRST STRUT
2 - SYNCHRONIZER HUB
3 - SPRING
BR/BE
Spring