Dodge 2001 Ram 1500 Owner's Manual page 1732

BR/BE
MANUAL - NV5600 (Continued)
Fig. 11 CLUTCH HOUSING BOLTS
1 - BOLTS (10)
Fig. 12 SHIFT RAIL BLOCKER BOLT
1 - SHIFT RAIL BLOCKER BOLT
MANUAL - NV5600
EXTENSION/ADAPTER HOUSING
(1) Remove bolts holding the extension/adapter
housing onto the transmission gear case.
(2) Remove extension/adapter housing from the
transmission gear case with Puller 8244 (Fig. 13).
NOTE: It may be necessary to straighten the hous-
ing during removal due to the tendency for the
reverse idler shaft to bind into one side of the
housing.
Fig. 13 Trans Case Puller
1 - PULLER
2 - EXTENSION/ADAPTER HOUSING
(3) Remove crossover detent plug, spring and
plunger from the extension/adapter housing (Fig. 14).
(4) Remove bolt and washer holding the crossover
cam to the extension/adapter housing (Fig. 15).
(5) Remove crossover cam from the extension/
adapter housing.
(6) Remove back-up lamp switch and gasket from
the extension/adapter housing.
(7) Remove countershaft rear bearing race from
the extension/adapter housing with Remover L-4518
(Fig. 16).
21 - 97