Dodge 2001 Ram 1500 Owner's Manual page 1741

21 - 106 MANUAL - NV5600
MANUAL - NV5600 (Continued)
Fig. 41 FIRST GEAR BLOCKER RINGS
1 - OUTPUT SHAFT
2 - FIRST GEAR BLOCKER RINGS
3 - FIRST GEAR FRICTION CONE
Fig. 42 SECOND GEAR 1-2 SYNCRO
1 - OUTPUT SHAFT
2 - FIRST GEAR BEARING SLEEVE
3 - SECOND GEAR
4 - FIXTURE
5 - 1-2 SYNCHRO 8227
(9) Press the 5-6 synchro assembly from the out-
put shaft.
(10) Remove sixth gear and the sixth gear bearing
from the output shaft (Fig. 43).
Fig. 43 SIXTH GEAR COMPONENTS
1 - SIXTH GEAR FRICTION CONE
2 - SIXTH GEAR
3 - OUTPUT SHAFT
4 - SIXTH GEAR BLOCKER RING
5 - 5-6 SYNCHRO
COUNTERSHAFT
(1) Install the countershaft into Fixture 8227 with
press blocks located under the fifth countershaft
gear.
(2) Place the assembly into a shop press.
(3) Use Guide 8235 on end of countershaft and
press the countershaft fifth gear from the counter-
shaft (Fig. 44).
(4) Place countershaft in Fixture 8227 with press
blocks placed under the sixth countershaft gear.
(5) Use Guide 8235 on end of countershaft and
press the countershaft sixth gear from the counter-
shaft (Fig. 45).
(6) Remove countershaft from the press and Fix-
ture 8227.
BR/BE