Dodge 2001 Ram 1500 Owner's Manual page 2421

21 - 786 AUTOMATIC TRANSMISSION - 47RE BR/BE
VALVE BODY (Continued)
The metering at land #2 establishes the line pres-
sure throughout the transmission. It is varied accord-
ing to changes in throttle position and the
transmission's internal condition within a range of
57-94 psi (except in REVERSE) (Fig. 245). The regu-
lated line pressure in REVERSE (Fig. 246) is held at
much higher pressures than in the other gear posi-
tions: 145-280 psi. The higher pressure for
REVERSE is achieved by the manual valve blocking
the supply of line pressure to the reaction area left of
land #4. With this pressure blocked, there is less
area for pressure to act on to balance the force of the
spring on the right. This allows line pressure to push
the valve train to the right, reducing the amount of
fluid returned to the pump's inlet, increasing line
pressure.
Fig. 245 Regulator Valve in DRIVE Position