Dodge 2001 Ram 1500 Owner's Manual page 1739

21 - 104 MANUAL - NV5600
MANUAL - NV5600 (Continued)
OUTPUT SHAFT BEARINGS
(1) Remove snap-ring holding the pocket bearing
onto the output shaft.
(2) Remove pocket bearing from the output shaft
with Sleeve 6444-8, Adapters 8234, Puller Rods
6444-4 and the remainder of Puller 6444 (Fig. 35).
(3) Remove snap-ring holding the rear output shaft
bearing onto the output shaft.
(4) Use Sleeve 6444-8, Adapters 8271 and Puller
Rods 6444-3 for 4X2 vehicles or Puller Rods 6444-4
for 4X4 vehicles with the remainder of Puller 6444 to
remove the rear output shaft bearing from the output
shaft.
(5) Remove rear output shaft thrust washer from
the output shaft.
Fig. 35 OUTPUT SHAFT POCKET BEARING
1 - PULLER 6444
2 - ADAPTERS 8234
INPUT SHAFT
(1) Remove fifth gear blocker ring from the input
shaft (Fig. 36).
(2) Remove fifth gear friction cone from the input
shaft (Fig. 37).
Fig. 36 FIFTH GEAR BLOCKER RING
1 - FIFTH GEAR BLOCKER RING
2 - INPUT SHAFT
Fig. 37 FIFTH GEAR FRICTION CONE
1 - FIFTH GEAR FRICTION CONE
2 - INPUT SHAFT
BR/BE