Scpi Read/Write - R&S OSP Operating Manual

R&S OSP
If any paths are defined for the R&S OSP, they are listed under [Path List].
The name of the path is indicated together with the relay setting related to the path.
Close the Notepad to exit the system info utility.
System Info:
The text file containing the System information is stored with the file name
ospSystemInfo.txt in the installation directory of the OSP Panel (default directory:
C:\OSP Panel).
Each time the system info utility is started at the OSP Panel, this file is overwritten with
the actual data.

5.7 SCPI Read/Write

As an additional feature, the OSP Panel allows a direct communication with the
R&S OSP via SCPI commands. This additional feature is foreseen for debug purpose
and requires to be familiar with SCPI commands of the R&S OSP. Refer to the section
on remote control
For direct communication with the R&S OSP via LAN interface proceed as follows:
1.
2.
The following dialog will appear:
Operating Manual 1505.3896.12 - 14
(chapters 6
Start the OSP Panel.
Select >Utility >Read/Write ... in the OSP Panel.
and 7 of this manual) for further information.
Instrument Functions
130