Table of Contents
Advertisement
R&S OSP
5.3.5 Using the R&S OSP-B102/-B112
After selection of the R&S OSP-B102 module this dialog is opened.
With the cursor left/right keys you can chose either relay, and with the cursor up/down
keys any terminal of that relay, indicated by the blue color. In the example this is
terminal 1 of relay K1.
Pressing the
terminal chosen ("C" displayed in blue) the relay is opened. The display of the switch in
the dialog is changed accordingly.
Pressing the key
A selected relay (K1 in this example) is displayed with a green surrounding. All
selected relays are taken over into a path configuration.
A non selected relay is not considered when defining a path configuration.
The operation as described above applies to further options of the R&S OSP as far as
the option has got the same relay configuration. It will apply to the following modules:
Option
R&S OSP-B112
R&S OSP-B108
Operating Manual 1505.3896.12 - 14
key closes the chosen relay position. With the Common
FUNCTION
toggles the selection of the relay.
STATUS
Relay configuration
2 x SP6T relay, 40 GHz
K1 = K11, DC MUX
Instrument Functions
117
Advertisement
Table of Contents
