Read Commands - R&S OSP Operating Manual

R&S OSP
ROUTe:PATH:CATalog?
The ROUTe:PATH:CATalog? query command returns a list of all currently defined
path names that are stored in the internal memory of the instrument.
Example
Characteristics
ROUTe:PATH:DELete[:NAME] <path_name>
The previously defined <path name> will be deleted from the instrument's internal
memory.
'<path_name>'
Example - Set
Characteristics
ROUTe:PATH:DELete:ALL
All previously defined path names will be deleted from the instrument's internal
memory.
Example - Set
Characteristics

7.4.2 READ Commands

The READ commands allow to acquire data from the different relay or I/O modules of
an R&S OSP. From relay modules the number of life time operation cycles of each
relay can be acquired, it can be acquired whether relay module R&S OSP-B104 is in
Interlock state or not and the condition of all input channels of I/O modules can be
acquired.
Operating Manual 1505.3896.12 - 14
ROUT:PATH:CAT?
Response: "config_01","config_02","config_03"
Firmware version V1.0
SCPI-confirmed. Query only.
String parameter to specify the name of the path to be deleted.
ROUT:PATH:DEL "config_03"
The path config_03 will be deleted.
Firmware version V1.0
SCPI-confirmed. No query.
ROUT:PATH:DEL:ALL
Afterwards, a call of
ROUT:PATH:CAT?
will return following response: ""
Firmware version V1.0
SCPI-confirmed. No query.
Remote Command Reference
158