Table of Contents
Advertisement
R&S OSP
SYSTem:NETWork:ADRess?
Returns the current Network address.
Response
Example
Characteristics
SYSTem:NETWork:GATeway?
Returns the current Gateway address.
Response:
Example
Characteristics
SYSTem:NETWork:MODe?
Returns the current Network configuration mode.
Response
Example
Characteristics
SYSTem:NETWork:MODe "AUTO"
Sets Network Mode to Automatic. This is the Default Network Mode for OSP. DHCP is
supported.
Example
Characteristics
SYSTem:NETWork:STATic "<IpAddr>","<Netmask>","<Gateway>"
Sets Network Mode to Static (no DHCP support) and defines Gateway address.
Operating Manual 1505.3896.12 - 14
Address of eth0 and eth0:1 in quotation marks
SYST:NETW:ADR?
Response: "eth0: 0.0.0.0 eth0:1: 192.168.48.147"
Firmware version 2.51
Query only.
Gateway address in quotation marks
SYST:NETW:GAT?
Response: "172.50.0.0"
Firmware version 2.51
Query only.
Two conditions in quotation-marks.
SYST:NETW:MOD?
Response: "DHCP_AUTO", "DHCP_STATIC"
Firmware version 2.51
Query only.
SYST:NETW:MOD "AUTO"
Firmware version 2.51
SCPI confirmed. No query.
Remote Command Reference
168
Advertisement
Table of Contents
