Table of Contents
Advertisement
R&S OSP
●
When a static IP address other then the default address is required, it can be changed
using the OSP Panel. See
3.2 Installing the R&S OSP Panel
The OSP Panel installation setup is available on CD which is part of the R&S OSP
delivery.
The installation setup includes the VISA libraries which are necessary for running the
OSP Panel.
To install the application, proceed as follows:
●
●
●
3.3 R&S OSP Panel Functions
The following sections can help you to make efficient use of the OSP Panel, which is
the application for manual control of the R&S OSP120 and may also be used in
connection with the R&S OSP130. The OSP Panel offers the following features:
●
●
●
●
The following examples are based on the assumption that the IP address has been
obtained dynamically to be 10.33.10.173.
Operating Manual 1505.3896.12 - 14
The R&S OSP is configured by default to IP address 192.168.48.147.
This address is to be entered in the OSP Panel application when using the
examples described in the following chapters.
Insert the documentation CD on the disk drive of your computer.
Select the directory "OSP Panel" on the CD, select the file setup.exe and press
the <ENTER> button to start the installation.
If the installation is complete, confirm and exit the installation program.
Configuration of the IP address
Dialogs to control the different options configured in the R&S OSP
Definition of path configurations
Direct access to SCPI commands
chapter 3.3.3
for detailed information.
Getting Started
36
Advertisement
Table of Contents
