Table of Contents
Advertisement
R&S OSP
Figure 5-48: Block Diagram Module R&S OSP-B158
When the module R&S OSP-B158 is configured within the R&S OSP, a manual
operation of the module can be performed via the OSP Panel. See
details.
For remote control operation see
See
5.2.18 RF Switch Module R&S OSP-B142
The module R&S OSP-B142 is designed as a universal RF switch modules using solid
state relay types. Depending on the variant it consists of one, two or three SPDT
switches or of three DP3T switches. All switches can be operated independently from
each other.
The solid state relay allows handling of up to 40 dBm in a frequency range up to
8 GHz.
The relay is a solid state type; i.e. an RF connection is provided from the terminal C
(Common) to the position P2 only with power switched on. When the relay is activated,
the terminal C is connected to position P1.
Operating Manual 1505.3896.12 - 14
chapter 9.2.22
for details on the connector pin assignments.
chapters 6
and 7.
Instrument Functions
chapter 3.3.8
for
108
Advertisement
Table of Contents
