Table of Contents
Advertisement
R&S OSP
This dialog allows to select all files which shall be imported and saved on the OSP.
Once all required files are collected, pressing the OK button will start the import.
Pressing the Add button moves the marked file to the list of selected files. With the
standard Windows function a group of files can be selected at once: using the Shift key
while clicking on a second file will mark all files between a first file and this one, and
using the Ctrl key at the same time will add the second file as a marked one.
Will exit the dialog
The selected files will be imported and stored as paths to the R&S OSP flash memory.
The marked file will be removed from the list of selected files.
All files will be removed from the list of selected files.
3.5 Sample Session
The sample session shows a typical application of the R&S OSP and gives a guidance
to the user how to solve the various switching tasks with the R&S OSP.
3.5.1 Example Path Configuration
The following example shows how to set up the path for a Microwave EMS system up
to 18 GHz consisting of a signal generator, three amplifiers and a two-channel power
Operating Manual 1505.3896.12 - 14
Getting Started
63
Advertisement
Table of Contents
