R&S OSP
3.6.3
Import of Path Configuration
Once you have generated the path configuration in virtual mode without instruments,
you can import it on an R&S OSP120 or R&S OSP130 with the same configuration as
used in virtual mode.
3.7
GUI Info Line
With OSP Panel version 2.57 onwards, you can activate an info line which is shown at
the R&S OSP130 built-in display, connected monitor and Web-GUI. (For details on
your firmware version, see the related Release Notes.)
Configure the info line either via the OSP Panel application or via SCPI
"SYSTem:OPTion" commands (see
with the instrument connected, i.e. with OSP Panel in physical mode or via SCPI
command.
Operating Manual 1505.3896.12 - 14
or
chapter
7.4.6). You can only configure the info line
Getting Started
71