Table of Contents
Advertisement
R&S OSP
If your computer is equipped with a firewall function, it may be necessary to allow the
firewall to unlock the OSP Panel. Here is an example of such a firewall message:
It is recommended to allow free access to Internet for the OSP Panel.
If the LAN connection is established, the R&S OSP device found on the LAN network
is displayed in the left field together with the installed options.
Note that it is necessary to register the R&S OSP once, if the instrument is switched
on for the first time or if the configuration has changed or if a firmware update has
been made. See
related to extensions with an OSP150.
In the below example, an R&S OSP130 Device is found on the network which is
equipped with three modules R&S OSP-B101, R&S OSP-B104 and R&S OSP-B102.
Furthermore, to this device an R&S OSP150 is connected which is equipped with three
modules R&S OSP-B101, R&S OSP-B102 and R&S OSP-B103.
Operating Manual 1505.3896.12 - 14
chapter 3.3.3
for further information. See also
Getting Started
chapter 8.2
for actions
38
Advertisement
Table of Contents
