Table of Contents
Advertisement
R&S OSP
4 Manual Operation
The model R&S OSP120 is the version in the R&S OSP family which is operated
remotely controlled. There are no keys and display on the front panel for manual
operation. If an R&S OSP150 is connected to this R&S OSP120, it is also controlled
from there.
The model R&S OSP130 is equipped with both display and front panel keys for
manual operation.
R&S OSP model
R&S OSP120 without display
R&S OSP130 with display
R&S OSP120 and
R&S OSP130
See the next chapter for manual operation modes.
4.1 Manual Operation of the Modules
"Manual operation" of the instrument functions is achieved by the OSP Panel or using
the graphical user interface (GUI) of the R&S OSP via Web-Browser (all models of the
R&S OSP family).
The model R&S OSP130 can be operated using the GUI together with a display and
keyboard.
The application OSP Panel runs on an external computer with Windows Operating
System. The external computer is connected to the R&S OSP via LAN network.
See
Information how to run the GUI via Web-Browser are provided
Details to the manual operation of the R&S OSP130 are given in
4.2 R&S OSP Setups
All setups which are necessary to perform in the Linux operating system, which is
integral part of the R&S OSP120 or OSP130, are to be done via external keyboard
and external monitor (not for OSP130).
See
Chapter 2.10
Operating Manual 1505.3896.12 - 14
chapters 3.2
and
3.3
for installation and operation of the OSP Panel.
chapter 2.7.2
and
2.7.3
gives an example for Linux related actions.
Manual operation ...
... with monitor and keyboard (GUI)
... direct control via front display and
panel keypad
... via LAN from a separate laptop or
PC (Web-GUI via VNC)
of this manual for how to connect these accessories.
Manual Operation
see Chapter
5.3.1
5.3.1
4.1
and
5.3.1
chapter
5.3.
chapter
5.3.
74
Advertisement
Table of Contents
