Input Cable And Terminal Block - Mitsubishi FX3U-20SSC-H User Manual

FX -20SSC-H Positioning Block User's Manual
3U
5.1.3

Input cable and terminal block

The cable for connecting the 20SSC-H input connector with external devices is described.
1. Input connector
The input connector of 20SSC-H complies with MIL-C-83503.
Procure the input cable while referring to the following.
1) Applicable connector (commercially available connectors)
Use the 20-pin (1-key) socket complying with MIL-C-83503.
Check in advance for interference with peripheral parts such as the connector cover.
2) Input cable (by Mitsubishi Electric)
Model name
*1
FX-16E- CAB
*1
FX-16E- CAB-R
FX-16E-500CAB-S
*1. indicates the cable length.
150 : 1.5m, 300 : 3m, 500 : 5m
3) Applicable connector for user cable (by Mitsubishi Electric)
The user should prepare the electric wires and pressure crimp tool.
Model name and configuration of I/O connector
Our model name
For flat
cable
For united
cable
4) Applicable connectors (commercially available connectors)
DDK Ltd. connector specified in Item (3) above.
2. Terminal block
1) Terminal block (by Mitsubishi Electric)
For the specification and internal circuit of the terminal block, refer to the following respective PLC
manual.
Model name
FX-16E-TB
2) Terminal layout of FX-16E-TB connected to input connector
Y-START X- A+
X-START X-INT0 X-INT1
*1. The S/S terminal is connected inside FX-16E-TB.
30
Cable length
1.5, 3, 5m
5m
FX -I/O- Set of 10 Crimp connector
2C
CON pieces FRC2-A020-30S
FX 2C -I/O- Housing HU-200S2-001
Set of 5
CON-S Crimp contact HU-411S
FX -I/O- Housing HU-200S2-001
2C
Set of 5
CON-SA Crimp contact HU-411SA
Converts input connector to terminal block
→ For the pin array of the input connector, refer to Subsection 3.5.1
X- B+
S/S *1
*1
S/S X- A- X- B-
5.1 Cable to Be Used, Applicable Connector and Wire Size
Flat cable (with tube) provided with a 20-pin connector at both ends
Round multi-conductor cable provided with a 20-pin connector at both ends
Bulk cable with 20-pin connector provided on a single end (cable color: red)
Description of part
(Made by DDK Ltd.)
Application and remarks
X-DOG S/S *1
*1
S/S Y-INT0 Y-INT1
Remarks
Applicable cable (UL-1061 recommended) and tool
Wire size
(Made by DDK Ltd.)
2
AWG28 (0.1mm )
357J-46740: Main body
1.27 pitch 20
357J-4664N: Attachment
conductors
2
AWG22 (0.3mm ) 357J-5538
2 357J-13963
AWG20 (0.5mm )
→ Refer to the FX
3U
→ Refer to the FX
3UC
Y- A+ *1 Y- B+
S/S
S/S *1 Y- A- Y- B-
5 Wiring
Crimp tool
Hardware Edition
Hardware Edition
*1
Y-DOG S/S
*1
S/S