Mitsubishi FX3U-20SSC-H User Manual page 255

FX -20SSC-H Positioning Block User's Manual
3U
4. Operation information
Sets the positioning operation for table operation and changes the current address.
Set the numeric value corresponding to each operation to the operation information.
5. m code information
m code is output each time at positioning operation.
For instructions on how to use the m code, refer to the following.
No code
• • • • • • • • • • • • • • •
m code after mode
m code with mode
-1
0 to 9999
• • • •
10000 to 32767
• • • • •
11 Buffer Memory (Parameters & Monitored Data)
11.5 Table Information
→ Refer to Subsection 10.1.3
→ Refer to Section 10.9
11
12
13
A
B
249