Mitsubishi FX3U-20SSC-H User Manual page 254

FX -20SSC-H Positioning Block User's Manual
3U
Table No.
X-axis
BFM
#3991,#3990
-
BFM
#3993,#3992
-
299
-
-
BFM #3994
BFM #3995
1. Position information
Set the following items according to the table operations set in the operation information.
Table Operation
Action
Positioning operation
Changes the current
address
Dwell
Jump
*1. Refer to the section shown below for details on the user units.
*2. The setting range is 0 to 3,276 (× 10 ms) if the version is earlier than Ver. 1.40.
2. Speed data (fx, f, fy)
Sets the operation speed of the positioning operation to be used for table operation.
Setting range: 1 to 2,147,483,647 [User unit]*
*1. Refer to the section shown below for details on the user units.
3. Circular information (i, r, j)
Sets center coordinate and radius for a circular line to be used in circular interpolation operation.
Setting range: -2,147,483,648 to 2,147,483,647 [User unit]
*1. Refer to the section shown below for details on the user units.
248
BFM Number
Y-axis XY axes
BFM
-
#12981,#12980
BFM BFM
#6991,#6990 #12983,#12982
BFM
-
#12985,#12984
BFM BFM
#6993,#6992 #12987,#12986
BFM
-
#12989,#12988
BFM
-
#12991,#12990
BFM #6994 BFM #12992
BFM #6995 BFM #12993
Item
Set the target address.
Specify the current address
(user) after changed.
Set wait time to be spent for
shifting operations.
Sets the table number of the
jump address.
Set the value within 1 to 50,000,000 Hz in converted pulse data.
Set the value within -2,147,483,648 to 2,147,483,647PLS in the converted pulse data.
11 Buffer Memory (Parameters & Monitored Data)
Name
Position information x
Position
informa-
tion
Position information y
Speed information x
Speed
informa-
tion
Speed information y
Center coordinate i
Circular
Radius r
informa-
tion
Center coordinate j
Operation information
m code information
Setting range: -2,147,483,648 to 2,147,483,647 [User unit]
Set the value within -2,147,483,648 to 2,147,483,647PLS in the converted
pulse data.
Setting range: -2,147,483,648 to 2,147,483,647 [User unit]
Set the value within -2,147,483,648 to 2,147,483,647PLS in the converted
pulse data.
Setting range: 0 to 32,767 (× 10 ms)
Setting range: 0 to 299
1
*1
11.5 Table Information
Description
Same as the table 0
Description
*1
*1
*2
→ Refer to Section 7.10
→ Refer to Section 7.10
→ Refer to Section 7.10
Default
K-1
K-1
K-1
K-1
K-1
K-1
K-1
K-1