Regenerative Load Ratio [Bfm #65, Bfm #165]; Effective Load Torque [Bfm #66, Bfm #166]; Peak Torque Ratio [Bfm #67, Bfm #167]; Servo Warning Code [Bfm #68, Bfm #168] - Mitsubishi FX3U-20SSC-H User Manual

FX -20SSC-H Positioning Block User's Manual
3U

11.3.28 Regenerative load ratio [BFM #65, BFM #165]

The regenerative load ratio power to the maximum regenerative power is stored in percentage.
With regenerative brake option, the regenerative power ratio to the allowable capacity is stored.
BFM Number
X-axis Y-axis
BFM #65 BFM #165

11.3.29 Effective load torque [BFM #66, BFM #166]

The continuous effective load torque is stored.
This parameter stores the average value of the load ratio to the rated torque (100%) from the past 15
seconds.
BFM Number
X-axis Y-axis
BFM #66 BFM #166

11.3.30 Peak torque ratio [BFM #67, BFM #167]

The maximum torque during operations is stored.
This parameter stores the peak value to the rated torque (100%) from the past 15 seconds.
BFM Number
X-axis Y-axis
BFM #67 BFM #167

11.3.31 Servo warning code [BFM #68, BFM #168]

Warnings detected by the servo amplifier are stored.
Clear the cause of the warning.

11.3.32 Motor feedback position [BFM #71, #70, BFM #171, #170]

Motor feedback positions are stored.
BFM Number
X-axis
BFM #71,#70
Regenerative load ratio (%)
Effective load torque (%)
Peak torque ratio (%)
→ For details on the warnings, refer to the manual of the connected servo amplifier
→ For details on the warning codes, refer to Subsection 13.2.4
Y-axis
BFM #171,#170 Motor feedback position (PLS)
11 Buffer Memory (Parameters & Monitored Data)
Description
Description
Description
Description
11.3 Monitor Data
Value Format Default
Decimal -
Value Format Default
Decimal -
Value Format Default
Decimal -
Value Format Default
Decimal -
235
11
12
13
A
B