Mitsubishi FX3U-20SSC-H User Manual page 52

FX -20SSC-H Positioning Block User's Manual
3U
2
Setting servo parameters
Double-click [File name]
When the edit window for servo parameters appears, set each parameter.
Make sure to set the servo amplifier series in accordance with the used servo amplifier.
3
Setting the connection destination
Select [Online]
When the connection setup dialog box appears, set each item, and then click the [OK] button.
4
Connecting a personal computer to the PLC main unit
46
[Edit] [Servo parameters] in the file data list.
[Connection setup].
→ For the connection route, refer to the FX Configurator-FP OPERATION MANUAL
→ For details on servo parameters, refer to Section 11.2
and the Servo Amplifier Instruction Manual (technical data)
7 Before Starting Positioning Operation
7.1 Note on Setting Parameters