Mitsubishi FX3U-20SSC-H User Manual page 195

FX -20SSC-H Positioning Block User's Manual
3U
2. Operation speed
The actual operation speed is decided by the following calculation formulas.
- Operation speed1
- Operation speed2
The actual operation speed 1 and operation speed 2 can be changed using the operation speed change
function except under the following conditions.
• During deceleration operation
• When the speed change disable during operation signal is ON.
3. Address specification
Specified address are handled as absolute address.
(The absolute/relative address specification is ignored.)
4. Rotation Direction
The rotation direction is determined by the relationship among the current address, target address 1 and
target address 2.
×
Override setting
×
Override setting
→ For change of the operation speed, refer to Section 7.6
9.12 Reciprocal movement insutruction (Ver.1.10 or later)
9 Positioning Control
1
2
3
4
5
6
7
8
9
10
189