Lcd; Keypad - Paradyne COMSPHERE
3610 User Manual

Network/
Device Alarm
Test Mode
Dial Backup
DTE
Status
Indicators
SDCP
Indicator
(Front Panel)
Figure 3-2. Model 3611 DSU Faceplate

LCD

The 2-line, 16-character LCD on the front panel
displays the following information:
Menus: The menu structure is provided in
Appendix A and the menu branches appear
throughout this chapter.
Input Screens: Used to enter information such as a
customer ID, the network address of a remote DSU,
or test durations. Input screens, such as test run
time, appear with a blinking cursor to indicate that
a field can be changed.
Display Screens: Provide configuration
information and test results.
3610-A2-GB46-60
Status
Ok
Alrm
Test
Dial
103 TXD
104 RXD
105 RTS
106 CTS
107 DSR
108 DTR
109 LSD
Front Panel
Spkr
Multirate
DSU
3611
496-14714-01
December 1996
Moves Up

LCD

One Level
from Current First
Line
Display
Port 1 DSU
Local Remot
F1
Left Function
Scroll
Key

Keypad

There are seven keys on the Model 3610 front panel.
The key terminates any work in progress.
The key returns to the previous display.
The and keys scroll. For input screens,
these keys move the cursor one character to the left
or right to allow one entry at a time. All menus and
display screens wrap around. Scrolling takes you to
the first or last selection of the menu.
The F1, F2, or F3 function keys select the item
displayed directly above the key on the LCD. Refer
to the following table.
Function
LCD
Key
F1 Each key press increments the
number, usually by 1.
F2 Each key press decreases the
number by the appropriate amount.
F3 One of the following appears, depending on
the purpose of the current display:
Enter Selects the value displayed.
Undo Voids any current changes.
Dial Dials the telephone number shown
on the first line of the display.
Available with installed DBM.
Enab Enables options.
Disab Disables options.
Displ Allows viewing of EIA lead status.
Front Panel Operation
Returns
LCD
Display to
Second Top-Level
Line
Menu
9.6 T
F2 F3
Right
Keys Scroll
Key
Input Screen
3-3