Operation; General Information - Samlexpower Evolution EVO-2212 Owner's Manual

SECtION 3 |

3.0 GeneRAL inFoRMAtion

EVO-RC Remote Control provides the user with the ability to modify EVO Inverter Charger's
operating parameters. The default settings in EVO Inverter Charger are adequate for some
installations but may have to be modified for others. This Section provides details on the remote
functions, status and menu maps and displays, fault messages and parameter settings.
3.1 nAViGAtinG tHe ReMote
The EVO-RC provides menu items and adjustable settings to configure your EVO Inverter
Charger to your specific parameters. Please refer to the layout at Fig 1.1(a).
• LcD Display (1) – The 2-line (16 characters each) LCD display shows status and
information for the EVO Inverter Charger. All Setup Menus and faults also appear on the
LCD display.
• on/oFF Key (2) – The ON/OFF Key is used for switching ON/switching OFF the EVO
Inverter Charger.
• navigation Keys (5, 6, 7, 8) – These four Keys allow simple access to menu items that
assists configuring, monitoring, and troubleshooting the EVO Inverter Charger.
o
navigation Key Functions:
 Back – Return to previous selection
 Up – Move to upper Group Number or upper Page Number Screen in various
Menu Maps.
 Down – Move to lower Group No. or lower Page No. Screen in various Menu
Maps.
 enter – Enter the selected option
• Status – Green LED indicator for indicating operating status (see details at Section 6,
Table 6.1)
• Alarm (Fault) – Red LED indicatorfor indicating fault conditions (see details at Section 6,
Table 6.1)
• SD card socket – This slot supports SD memory card (up to 16GB; FAT 16/32). The
SD Card is used for (i) data logging of EVO Inverter Charger's operational statistics and
events and (ii) saving and uploading of programmed parameters. See Section 5: SD Card.
6 | SAMLEX AMERICA INC.

Operation

APPENDIX A