EVO INVERTER/CHARGER | Quick Start Guide Thank you for purchasing the Samlex Evolution (EVO ) Series Inverter Charger. We know you will enjoy many years of great service from this quality state-of-the-art product. Samlex Customer Service and Application Engineers are available to assist you with installation, setup, or operating instructions.
Page 3
EVO INVERTER/CHARGER | Quick Start Guide 2. Read the entire EVO Owner’s Manual as well as the Remote Control EVO-RC Owner's Manual • Familiarize yourself with its contents prior to installation or operation. This Guide will frequently refer to specific pages in the Owner’s Manual for detailed information. WARNING! If there are any items in Sections 1, 2 or 3 of the Owner’s Manual that you do not understand, do not attempt to install the unit yourself.
EVO INVERTER/CHARGER | Quick Start Guide BATTERY SIDE FUSE (Within 7” of Positive Post) NO - Normally Open Contact DC ELECTRICAL Common PANEL To Remote Start/Stop NC - Normally Closed Contact Terminals on the Neg (-) Bus Generator Pos (+) BATTERY TEMPERATURE SENSOR MODEL...
Page 5
EVO INVERTER/CHARGER | Quick Start Guide NO - Normally Open Contact Battery Common Temperature To Remote Start/Stop Sensor - Model EVO-BCTS NC - Normally Closed Contact Terminals on the Generator Auxiliary Fuse Optional Lead Acid Generator Auto (Within 7” Battery Bank of battery Start/Stop Battery Isolator...
Page 6
EVO INVERTER/CHARGER | Quick Start Guide NO - Normally Open Contact Battery Common Temperature To Remote Start/Stop Sensor - Model EVO-BCTS NC - Normally Closed Contact Terminals on the Generator Auxiliary Optional Fuse Lead Acid Generator Auto (Within 7” Battery Bank of battery Start/Stop Battery Isolator...
EVO INVERTER/CHARGER | Quick Start Guide 3. Layout of the EVO • Refer to Section 2 starting at page 30 of the EVO Owner’s manual to become familiar with all the relevant connection points and components. 4. Mounting the Units •...
EVO INVERTER/CHARGER | Quick Start Guide Determine whether the optional EVO-RC remote control is necessary for your application • The Optional EVO-RC Remote Control provides useful functional information such as battery voltage, battery charging status, and AC output power. EVO-RC Remote Control is also capable of logging events to an SD card to create a history record of usage and performance.
Page 9
EVO INVERTER/CHARGER | Quick Start Guide 10. Switch on the EVO Inverter Charger. Refer to Section 6 starting at page 109 of the EVO Owner’s Manual • Press and hold the ON/OFF Button. • Green LED labeled “ON” will flash 3 times, will go off momentarily, then resume ON steady.
Page 10
EVO INVERTER/CHARGER | Quick Start Guide 13. The first parameter you should change is the Date and Time Refer to Section 4.10 of the EVO-RC Owner's Manual). To set time and date (no password required): • Press Enter from any Operating Mode Screen. Up Key x 5 Enter Key SELECT GROUP...