Sd Card; Data Logging - Samlexpower Evolution EVO-2212 Owner's Manual

SECtION 5 |
5.1 SD cARD GeneRAL inFoRMAtion
SD Card slot has been provided for data logging and for saving the programmed parameters.
SD card supports FAT16/FAT32 format up to 16GB in size.
When the SD card is inserted, the LCD screen will display the following.
SD card detected
V2.x xxGB
SD card detected

SD card

V2.x xxGB
unusable !
SD card
F i l e c r e a t i ng . . .
unusable !
F i l e c r e a t i ng . . .
SD card
!
Read error !
cAUtion!
SD card
SD card
Read error !
Write error !
Do not remove SD Card when data loggin has been enabled (may corrupt files). Follow "STOP
SD card
SD card full !
SD CARD" procedure (Section 4.10) before removing the SD Card.
Write error !
SD card full !
!
Attention!
Ne pas retirer la carte SD lorsque « data loggin » a été activée (peut corrompue les fichiers). Suivez la procédure "STOP
SD CARD" (article 4.10 ) avant de retirer la carte SD .

5.2 DAtA LoGGinG

It is highly recommended that the current date and time be set as the data log files will be
recorded with this EVO's programmed date and time. Please see Section 4.9 for "TIME SETTING".
Data logging can be disabled and data logging times can be selected using Parameter Setting
Mode under "Other Functions" (See Section 4.8 and Table 4.8 under heading "DATALOG
TIME" and "DATALOG DISABLE").
SD card detected
When the SD card is inserted and Data Logging Function is enabled (Default), the EVO Inverter
V2.x xxGB
Charger will start recording statistics and events on the card.
SD card detected
SD card
V2.x xxGB
unusable !
SD card detected
SD card
F i l e c r e a t i ng . . .
V2.x xxGB
unusable !
SD card
F i l e c r e a t i ng . . .
SD card
unusable !
Read error !
F i l e c r e a t i ng . . . SD card detected
SD card
SD card
V2.x xxGB
Read error !
Write error !
SD card
SD card
SD card
SD card full !
Read error !
unusable !
Write error !
F i l e c r e a t i ng . . .
SD card
SD card full !
Write error !
SD card
SD card full !
Read error !
SD card
Write error !
SD card full !
38 | SAMLEX AMERICA INC.
SD Card
SD card is detected and shows the Version and capacity. "xx" is the capacity.
Not supported card.
Data log function has been initiated and new file is being created. Do not
remove the SD card when file creating is displayed.
Read error, the data log function/update/upload will stop.
Write error. The Data logging function will stop.
1. Card full. Data logging funtion has stopped.
2. There is not enough space to create Data Log File Folder or to save file
with saved programmed parameters.
NOTE: Once there is enough space to create a Data Log File Folder and
subsequently, it runs out of capacity due to recording newer data, it will
start to overwrite on older files.
APPENDIX A