Samlexpower Evolution EVO-2212 Owner's Manual page 129

SECtION 4 |
PARAMeteR SAVe
Save all parameters to SD Card. (see Details at Section 5)
Up Key x 4
SELECT GROUP
CHARGE CURVE
4.9 GRoUP 6 PARAMeteR SetUP: tiMe SettinG
Please refer to Parameter "TIME SETTING" under Group 6 at Fig 4.2. Set up details are given
below. The Date and Time Format is Year/Month/Day Hour:Minute (24 hour clock):
Up Key x 5
SELECT GROUP
CHARGE CURVE
4.10 GRoUP 7 PARAMeteR SetUP: StoP SD cARD
Please refer to Parameter "STOP SD CARD" under Group 7 at Fig 4.2. Set up details
are given below:
Once SD Card is being used, it should be removed/ejected only after the operation of the
Card has been stopped as shown below and mesage "Please remove SD Card" appears. If
the SD card is not removed within 30 sec, it will reset. After the card is removed, it reverts to
the original operating screen.
Up Key x 6
SELECT GROUP
CHARGE CURVE
Parameter Setup
Enter Key
SELECT GROUP
OTHER FUNCTION
Enter Key
SELECT GROUP
TIME SETTING
Enter Key
SELECT STOP
SD CARD
POWER SAVING
1 = Enable
TIME SETTING
2000/01/01 00:00
Up Key x 1
STOP SD CARD
0 = No
APPENDIX A
Up Key x 10
PARAMETER SAVE
0 = No
Enter Key
STOP SD CARD
1 = Yes
SAMLEX AMERICA INC. | 37
Please remove
the SD Card
If SD Card is not
removed within 30 sec,
the unit will reset