EVO-4248SP INVERTER/CHARGER | Quick Start Guide Thank you for purchasing the Samlex EVO-4248SP Inverter/Charger. We know you will enjoy many years of great service from this quality state-of-the-art product. Samlex Customer Service is available to assist you with installation, setup, or operating instructions. The EVO-4248SP Inverter/Charger is highly configurable for many different and specific applications.
Page 3
EVO-4248SP INVERTER/CHARGER | Quick Start Guide CAUTION! If you are not sure of what parameters you need to change, consult your point of purchase or call Samlex Tech Support. You should also consult a Certified Electrician who is familiar with Local and National Electrical Codes to ensure a safe and code compliant installation.
Page 4
EVO-4248SP INVERTER/CHARGER | Quick Start Guide CAUTION! If you are not sure of what parameters you need to change or what values to change to, consult your point of purchase or call Samlex Tech Support. You should also consult a Certified Electrician who is familiar with Local and National Electrical Codes to ensure a safe and code compliant installation.
Page 5
EVO-4248SP INVERTER/CHARGER | Quick Start Guide LEGEND FOR FIG 1 NOTES: For sizing of wiring and fuses, refer to the following in the EVO-4248SP Owner's Manual: DC side wiring: Table 3.1 b) AC side wiring: Table 3.2 for AC input and Table 3.3 for AC output c) For details regarding 120 VAC Single Phase Input, see Section 3.6.1.2 AC Panel 1.
EVO-4248SP INVERTER/CHARGER | Quick Start Guide 3. Layout of the EVO-4248SP • Refer to Section 2 of the Owner’s manual to become familiar with all the relevant connection points and components. 4. Mounting the Units • Refer to mounting information at Section 3.3 starting at page 35 of the Owner’s Manual •...
Page 7
EVO-4248SP INVERTER/CHARGER | Quick Start Guide • EVO-RC-PLUS Remote Control is required to adjust any of the programmable parameters to customize its functionality to your specific requirements. For all programming instructions, please refer to the Owner's Manual for Remote Control EVO-RC-PLUS.
Page 8
EVO-4248SP INVERTER/CHARGER | Quick Start Guide INFO The optional EVO-RC-PLUS Remote Control provides the user with the ability to modify the EVO-4248SP Inverter/Charger’s operating parameters. The default settings in EVO-4248SP Inverter/Charger are adequate for some installations but may have to be modified for others. It is strongly recommended that the user review the EVO-4248SP Owner’s Manual / EVO-RC-PLUS Remote Control Manual, before putting any load or charging batteries.
Page 9
EVO-4248SP INVERTER/CHARGER | Quick Start Guide This Quick Start Guide provides basic steps required for planning , installing, and operating your new EVO-4248SP Inverter/Charger. Based on the specific application, actual installation procedure will vary. Plan your installation accordingly. Read the entire EVO-4248SP Owner’s Manual.