Samlexpower Evolution EVO-2212 Owner's Manual page 28

SECTIOn 2 |
2.5 bAttery temPerAture SenSor evo-bctS [fig 2.5 (a)]
1. Temperature Sensor: Mounting hole: 10mm/0.39" suitable for 3/8" or 5/16" battery studs
2. rJ-45 Plug
3. 5 meter/16.5 ft cable
note: Mount the sensor on the Positive or Negative terminal stud on the battery as shown in fig 2.5(b)
1
fig 2.5(a) temperature Sensor model evo-bctS
2.6 contentS of PAcKAge
Inverter/Charger
Temperature Sensor EVO-bCTS [fig 2.5(a)]
DC Terminal Covers (1a, 1b: fig 2.1) (fitted on the unit with 2 screws each)
Mating Connectors (14, 15, 16: fig 2.1)
Wire End Terminals for AC Wiring (fig 3.11)
Model
EVO-2212 and EVO-2224
EVO-3012 and EVO-4024
Owner's Manual
Quick Start Guide
28 | SAMLEX AMErICA INC.
Components & Layout
3
2
fig 2.5(b) temperature Sensor installation
AWG#10 AWG #8
3
-
AWG#6
6 -
9 6