Installer Codes; Digital Keys - Bentel Security KYO 320 Installation Manual

Disarming with User Code If this option is enabled,
the Code will be able to Disarm all the Partitions com -
mon to both the Code and Keypad in use.
n Installer Codes
This paragraph provides a general description of the func -
tions that can be performed by the Installer Codes: refer to
the KEYPAD PROGRAMMING MANUAL for details.
View Log If this option is enabled, the Code will be
able to view and print the events recorded in the log.
+
This feature is provided by the optional K3/PRT2
Printer Interface (refer to "Printer Interface" in the
APPENDIX). Only the enabled events will be
printed (refer to "Log — Events setup").
Zone Status If this option is enabled, the Code will be
able to view the status (Standby, Alarm, Short, Tamper,
Bypass) of all the Control Panel Zones, and the per-
centage of the Voltage value.
Zone Test If this option is enabled, the Code will be
able to Test all the Control Panel Zones.
Output Test If this option is enabled, the Code will be
able to Stop all the Control Panel Outputs.
Clear Call Queue If this option is enabled, the Code
will be able to clear the Call Queue.
Voice Functions If this option is enabled, the Code
will be able to record and listen to Voice Messages.
Change Installer PIN If this option is enabled, the
Code will be able to change its own PIN, and the PINs of
its assigned codes (sons).
User Codes If this option is enabled, the Code will be
able to program the User codes from the Keypad.
Digital Keys If this option is enabled, the Code will be
able to the Digital Keys from the Keypad.
Panel Programming If this option is enabled, the Code
will be able to program the Control Panel from the Keypad.
Enrol Wireless If this option is enabled, the Code will be
able to enrol Wireless Devices from the Keypad.
Keypad Broadcast If this option is enabled, the Code
will be able to edit the Keypad strings.
Change date/time If this option is enabled, the Code
will be able to change the system Date and Time from
the Keypad.
82

Digital keys

The Digital Keys page will allow you to program the pa -
rameters of the Digital Keys, as follows.
+
Digital Keys can be enrolled at the Keypad (refer to
the KEYPAD PROGRAMMING Manual.
The Table on the left side of the Digital Keys page
shows the Keys the Control Panel can manage.
ü Select the required Keys:
Box checked (ü) = Key Enabled
Box empty = Key Disabled
Press the Select button at the bottom of the page to En-
able/Disable all the Keys.
+
The system will consider Disabled Keys as False,
even if they have been enrolled.
No. This is the Key ID Number.
Description This editable field (16 characters) is for
the Key label (e.g. User's Name). The label will identify
the key in all the operations it is involved in.
The parameters of the key (selected on the left side of
the page) can be programmed on the right side of the
Keys page, as follows.
Enable on Partitions This line will allow you to assign
the Key to the Partitions.
Box checked (ü) = the Key is Enabled on the corre -
sponding Partition
Box empty = the Key is Disabled on the corresponding
Partition
To DISABLE the Key on all the Partitions: click the Par -
titions button (bottom of page) then select None.
To ENABLE the Key on all the Partitions: click the Parti -
tions button (bottom of page) then select All.
To toggle the current Enabled/Disabled status of the
Key: click Partitions button (bottom of page) then se -
lect Invert selection.
Stop Alarms If this option is enabled, the Key will be
able to stop Control panel Alarms (refer to "Stop
Alarms" under "Codes - Code types").
Stop Partition Alarms If this option is enabled, the
Key will be able to stop Partition Alarms (refer to "Stop
Alarms" under "Codes - Code types").
Clear Call Queue on disarming If this option is en -
abled, the Key will be able to stop outgoing Alarm calls
(refer to "Clear Call Queue upon Disarming" under
"Codes - Code types").
Associated Timer If this option is enabled, the Key will
be able to perform its programmed functions ONLY dur -
ing its Timer slots (refer to "Scheduler - Timers").