Telephone Action Priority; Colours; Events Details - Bentel Security KYO 320 Installation Manual

Output The ON column is for the ID number of the Out -
put that must activate when the respective Event occurs
(refer to No. column on the Outputs page).
Enter 0 if the event is not to activate any Output.
+
You can select the required Output by double click-
ing the corresponding cell in the Output column.
Dig. Comm. The ON column is for the ID Number of
the Actions the Digital Communicator must generate
when the Event concerned starts (see No. column in
the Actions window on the Digital Communicator
page) . The OFF column is for the ID Numbers of the
Actions the Digital Communicator must generate when
the Event concerned ends (see No. column in the Ac-
tions window on the Digital Communicator page).
Enter 0 in the ON or OFF column if the Digital Commu-
nicator for NO Actions.
+
You can associate the Digital Communicator Ac -
tion with the Event by double clicking the corre -
sponding cell in the Dig. Comm. ON or Dig.
Comm. OFF column.
Dialler The ON column is for the ID Numbers of the Ac -
tions the Dialler must generate when the Event con -
cerned starts (see No. column in the Actions window
on the Dialler page).
The OFF column is for the ID Numbers of the Actions
the Dialler must generate when the Event concerned
ends (see No. column in the Actions window on the
Dialler page).
Enter 0 in the ON or OFF column if the Dialler is not to
generate any Actions.
+
You can associate the Dialler Action with the Event
by double clicking the corresponding cell in the
Dialler ON or Dialler OFF column.
Contact ID Code Event Code default value with Con-
tact ID protocol. If teleservice needs this value can be
changed.
SIA N Code Event Code default value with SIA proto-
col (New event). If teleservice needs this value can be
changed.
SIA O Code Event Code default value with SIA proto-
col (Restore). If teleservice needs this value can be
changed.
n Telephone action priority
Priority Actions will override all other Actions in the call
queue.
The Digital Communicator Action marked with an excla-
mation mark (refer to "Actions" in the "Digital Communi-
cator" section) has priority over all other Telephone
Actions. The Dialler Action marked with an exclamation
mark (refer to "Actions" in the "Dialler" section) has pri-
56
ority over all other Telephone Actions except the priority
Action set for the Digital Communicator.
+
The priority Telephone Actions are useful in situa-
tions that require quick intervention, such as Medi-
cal emergency and Duress.
n Colours
The Colours button will allow you to assign a colour to
each group of events.
n Events Details
The Events Details button will allow you to filter the
events that will be shown, as follows.
Highlight programmed events If you Enable this op-
tion, Events with AT LEAST ONE associated Action (on
an Output, Digital Communicator or Dialler) will be dis-
played in bold face.
Show only programmed events If you Enable this
option, only the Events with AT LEAST ONE associated
Action (on an Output, Digital Communicator or Dialler)
will be shown.
None If you Enable this option, AllEvents will be displayed.
Zone If you Enable this option, all the Zone events will
be shown. If this option is Disabled, the Zone events will
be grouped into the following *Global* Events:
Ø Alarm on zone *Global*
Ø Alarm on zone Wireless *Global*
Ø Tamper on zone *Global*
Ø Tamper on zone Wireless *Global*
Ø Bypass zone *Global*
Ø Bypass zone Wireless *Global*
Ø Real time of zone *Global*
Ø Real time of zone Wireless *Global*
Partition If you Enable this option, all the Partition events
will be shown. If this option is Disabled, the Partition
events will be grouped in the following *Global* Events:
Ø Fire alarm on partition *Global*
Ø 24h alarm on partition *Global*
Ø Burglar alarm on partition *Global*
Ø Generic alarm on partition *Global*
Ø Tamper alarm on partition *Global*
Ø Generic+Tamper alarm on partition *Global*
Ø Away alarm on partition *Global*
Ø Stay alarm on partition *Global*
Ø Not Ready-to-arm partition *Global*
Ø Extended not Ready-to-arm partition *Global*
Ø Partial arming partition *Global*
Ø Global arming partition *Global*
Ø Disarming partition *Global*
Ø Exit time on partition *Global*
Ø Entry time on partition *Global*
Ø Autoarming warning partition *Global*
Ø Memory alarm on partition *Global*
Ø Memory tamper on partition *Global*