Technical Specifications - Bentel Security KYO 320 Installation Manual

+
Unlike KYO300, the new KYO320 control panel
supports all Bentel LCD Keypads (Alison-S,
Alison-DVP, Mia-D e Mia-S). The manufacturer
recommends to comply with following rules:
1- the Keypad from 17 to 32 address must be
Mia-D and Alison-DVP type ONLY;
2- if the number of BPI bus devices is greater than
80, must be utilized Mia-D and Alison-DVP key-
pad ONLY, otherwise the bus BPI bit rate goes
down.
K3/VOX2 The K3/VOX2 Voice board (accessory item)
can be used for Voice Messages, and Telephone Access.
K3/PRT2 The K3/PRT2 Printer Interface (accessory
item) can be used for real-time and/or Event Log print-
out.
Power station The Power station has been especially
designed for Security system applications. The tamper
protected box (protected against delinquency and
forced removal) can house a backup battery for power
supply during black-out. This control panel supports up
to eight BXM12-B/30 3A Power Stations and/or
BXM12-B/50 5A Power stations.
Management Software The management software
(runs under Windows) provides full Programming, Cus-
tomer Database and real-time Supervisory functions,
and will allow you to make the fullest use of all the sys-
tem features.
The B-Mod Modem The B-Mod Modem will allow you
to Upload/Download from/to the remote system and
carry out Teleservice operations (remote diagnosis
and maintenance). The B-Mod/RX will allow you to Up-
load/Download from/to the remote system and carry
out Teleservice and Telemonitoring (send/receive
real-time transmissions).
KYO320

Technical Specifications

The following table contains the technical Specifica -
tions of the KYO320.
Voltage
Maximum current
draw
Insulation Class
Power
Supply/Battery
Charger
Maximum Current
available for
Peripherals
Battery
(Brand and Type)
Random Digital
Key/Card Codes
Operating
Temperature
Dimensions
(W x H x D)
Weight
(without battery)
The following chart shows the current draw (I (mA) col-
umn) and size of the accessory components.
Component
KYO320 Main Board
MIA-D Keypad
ALISON-DVP and
ALISON-S(B029) Keypad
ECLIPSE Reader
PROXI Proximity Reader
ALISON/32LP LED Keypad
M-IN/6 Input Expander
M-OUT/6 Output Expander
Omnia4R 4 Relay Module
K3/VOX2 + VOX-REM
Voice Board + Microphone
-Loudspeaker Board
K3/PRT2 Printer Interface
BXM12-B/30 Power Station
BXM12-B/50 Power Station
VectorRX Receiver
INTRODUCTION
230 V~ ±10% 50/60 Hz
0.9 A
Class I
13.8 V_ ±1% 3 A (5A
accessory item)
1.8 A (3.8 A accessory item )
12 V - 7 Ah or 12 V - 17 Ah
YUASA
NP 7-12 FR or NP 17-12 FR or
similar
Case Flame Class UL94-V2 or
higher
4.295.000.000
5 - 40 °C
339 x 488 x 108 mm
5.55 Kg
I Size
(mA) (WxHxD mm)
250 —
50 164 x 133 x 44
40 143 x 115 x 38
30 —
30 78 x 108 x 22
70 142 x 115 x 35
20
20 108 x 101 x 34
120
20 —
40 —
10 —
10 —
50 146 x 290 x 28
7