Scheduler - Arming - Bentel Security KYO 320 Installation Manual

+
The system will not generate the Customized
event, if the status of Event 1 is different from that
of Event 2, when the Window is not running (see
Fig. 46: b3, b6 and b9).
Ø Event 1 and Event 2 Spot, NO Window (NOT
ALLOWED)
+
If you apply the XOR Operator to two Spot Events,
you MUST program the Window.
Ø Event 1 and Event 2 Spot, WITH Window
When calculating the XOR result of two Spot Events,
you must consider them as both ending when the Win -
dow expires. In this way, the Customized Event will start
when the status of Event 1 is different from that of
Event 2 (see Fig. 46: e1, e3 and e5).
The Customized Event will end when the status of
Event 1 is the same as that of Event 2 (see Fig. 46: e2,
e4, and e6).

Scheduler - Arming

You can program the Scheduler to manage up to 16
Day Models (e.g. Weekday, Holidays, etc.), each with
up to 4 Arm and 4 Disarm operations per Partition.
!
The Scheduler Actions will be ignored during
the programming session.
You can program the automatic Arm/Disarm parame -
ters in the Arming page.
To create the Day Models — click the Models tab.
Partitions This field shows the Partition Descriptions
(to be programmed in the Partitions page).
1st Dis. / 2nd Dis. / 3rd Dis. / 4th Dis. These fields will
allow you to set up to 4 Disarm times for the corresponding
Partition.
Valid format: hh.mm — where hh represents the hour
(00 to 23) and mm represents the minutes (00 to 59).
For example, to set 7:45 a.m. — enter 07.45.
Figure 47 Scheduler - Arming Page
KYO320
to set 5:45 p.m. enter 17.45.
If you enter an invalid value, the application will display
an error message.
1st Arm. / 2nd Arm. / 3rd Arm. / 4th Arm. These
fields will allow you to set up the automatic arming times
for the corresponding Partition.
1st Type / 2nd Type / 3rd Type / 4th Type These
fields will allow you to select the Arming Mode (Type)
for that Partition:
Ø A = Away
Ø S = Stay
Ø I = Stay with 0 Delay (Instant)
n Type Description
The Type Descr. button opens a window for the Model
labels (Weekday, Half-day, Holiday, Christmas holiday,
Summer Holiday, etc.).
No. This non-editable field shows the Model ID Number.
Description This field will allow you to edit the Model
label (maximum 16 characters).
n Models
The Models button will open the programming window
of the parameters described in this section.
Day This field will allow you to select the Day number.
Valid entries: 1 through 31 or Asterisk *.
Ø If you select an asterisk (*), the Day number (1
through 31) will be irrelevant for the Model.
Ø If you select a Day number, you will not be able to se -
lect a Weekday.
Ø If you select an invalid number, the application will
automatically rectify it to last day of the month
concerned, when you click Download.
Month This field will allow you to select the Month.
PROGRAMMING 71