Input And Output Expanders - Bentel Security KYO 320 Installation Manual

LED
red Status of Reader Partitions
I OFF = ALL the Reader Partitions are
DISARMED;
ON = AT LEAST ONE of the Reader Partitions
is ARMED.
Slow blinking = AT LEAST ONE of the Reader
Partitions has AT LEAST ONE Alarm or Tamper
memory, and all Partitions are DISARMED.
Fast blinking = AT LEAST ONE of the
Reader Partitions has AT LEAST ONE Alarm
or Tamper memory, and AT LEAST ONE Par -
tition is ARMED.
amber A Mode Arming:
A OFF = the status of the Keypad Partitions
DOES NOT MATCH the A Mode Arming con -
figuration;
ON = the status of the Keypad Partitions
MATCHES the A Mode Arming configuration.
green B Mode Arming:
B OFF = the status of the Keypad Partitions DOES
NOT MATCH the B Mode Arming configuration;
ON = the status of the Keypad Partitions
MATCHES the B Mode Arming configuration.
+
These descriptions are valid also for
ALISON-DVP keypad proximity reader LEDs.
+
These descriptions are not valid when a
key is present at the Reader.
+
If ALL THREE LEDs blink, the system HAS NOT
RECOGNIZED the Key/Card (false Key/Card).
If ONE LED blinks, one or more of the Partition
zones is already in Alarm status.
n Input and Output Expanders
No. DESCRIPTION
96 Seize microswitch (solder side)
97 Microprocessor
98 Buzzer
103
103
Figure 9 Module and Expander box
14
DESCRIPTION
103
111 103
72 69 9697
a)
+
C
R
BPI 5V
+F
L1
L2
+F
L3
L4
+F
L5
L6
102 80 101
Figure 8 M-IN/6 Input Expanders (a) and M-OUT/6
Output Expanders (b)
No.
99 Buzzer Mode Jumper:
1 ooo 3 = buzzer OFF (at default)
1 //o 3 = buzzer will activate when terminal
[OC6] opens
1 o// 3 = buzzer will activate when terminal
[OC6] connects to negative
100 Tamper ands Seize mode Jumper:
oo = Microswitches enabled (at default)
// = Microswitches disabled
101 Tamper microswitch
102 Terminal Board
103 Frontplate screw locations (4)
104 Expander (Input, Output, etc.)
105 Expander screws (2)
106 Cable entry
107 Screw locations (2) for mounting to 503 outlet
box or similar
108 Cable duct entry
109 Surface mounting screw locations (2)
110 Seize microswitch bracket
111 Plastic tooth (closes the microswitch)
104 105 96 106 107 108
105 101
73 72 80 69
b)
+
C
R
BPI 5V
+F
OC1
OC2
+F
OC3
OC4
+F
OC5
OC6
+F
BL238
100 102 96 101
DESCRIPTION
109
109
73
98
97
99
100
107
110