Input Expanders; Output Expanders - Bentel Security KYO 320 Installation Manual

Ev. on red LED
Event n. ----
To associate an event with the Red LED (enter the
Event ID number (refer to the EVENT column in the
"Events-Actions" table under "PROGRAMMING" in the
INSTALLATION MANUAL). Enter zeros, if no event is
to be assigned to the Red LED.
6b. Press B to go to the next step (to assign an event to
the Yellow LED).
Ev.on yel. LED
Event n. ----
6c. Press B to go to the next step (to assign an event to
the Green LED).
Ev.on green LED
Event n. ----
then press ENTER.
From step 6, to select the 3 LED operating mode.
Reader 001
3 LED
6d. Press ENTER;
Partition 1-8
XXXXXXXX
6e. Select the Reader partitions (refer to "Enabling Par-
titions and A, B, C and D Mode" under "Using the Key-
pad"), then press ENTER.
Yel.arm. 1-8
AAAAAAAA
6f. Set up the A Mode configuration for the Reader con-
cerned (refer to "Enabling Partitions and A, B, C and D
Mode" under "Using the Keypad"), then press ENTER.
Green arm. 1-8
AAAAAAAA
6g. Set up the B Mode configuration for the Reader con-
cerned (refer to "Enabling Partitions and A, B, C and D
Mode" under "Using the Keypad"), then press ENTER.
7. Press the A or B buttons to scroll through and pro-
gram the following options: "View.contr. mem." (View
control unit alarm memory), "View. Area.mem." (View
area alarm memory) , "Comp EN50131" (Compatibility
with EN50131), "BuzzerEntryTime" (Buzzer during
entry time) and "BuzzerExitTime" (Buzzer during Exit
time), then press ENTER and return to step 3.
1 M-IN/OUT expander programmed as Input Expander or Input/Output Expander (see "M-IN/OUT Programmable
Input/Output Expander" in the "INSTALLATION" chapter in Vol. 1).
2 M-IN/OUT expander programmed as Input Expander or Input/Output Expander (see "M-IN/OUT Programmable
Input/Output Expander" in the "INSTALLATION" chapter in Vol. 1).
KYO320
n Input Expanders
From the Configuration menu, using A or B, select the
Input Expanders option.
Configuration

Input Expanders

1. Press ENTER;
Input Exp. n.001
InputExpander001
2.Using A or B, select the Input Expander
grammed, then press ENTER.
Description
InputExpander001
3. Enter the Input Expander
text" under "Using the Keypad"), then press ENTER.
InputExpander001
Not present
4. Press ON to enrol the Input Expander
then press ENTER to continue. To unenrol an Input
Expander (delete from the Configuration), press OFF.
5. To go back to the Configuration menu, press ESC.
n Output Expanders
From the Configuration menu, using A or B, select the
Output Expanders option.
Configuration

Output Expanders

1. Press ENTER.
Output Exp.n.001
Expander out 001
2. Using A or B, select the Output Expander
grammed then press ENTER.
Description
Expander-out 001
3. Enter the Output Expander
texts" under "Using the Keypad"), then press ENTER.
Expander-out 001
Not present
4. Press ON to enrol the Output Expander
ENTER to continue.
PROGRAM PANEL
1
1
to be pro-
1
label (refer to "Editing a
1
(Present),
2
2
to be pro-
2
label (refer to "Editing
2
, then press
19