Input Expanders; Output Expanders - Bentel Security Kyo 320 Installation Manual

Ev. on red LED
Even t n. ----
To as so cia te an event with the Red LED (en ter the
Event ID num ber (re fer to the EVENT co lumn in the
"Events-Actions" ta ble un der "PROGRAMMING" in the
INSTALLATION MANUAL). Enter ze ros, if no event is
to be as si gned to the Red LED.
6b. Press B to go to the next step (to as sign an event to
the Yel low LED).
Ev.on yel. LED
Even t n. ----
6c. Press B to go to the next step (to as sign an event to
the Gre en LED).
Ev.on green LED
Even t n. ----
then press ENTER.
From step 6, to se lect the 3 LED ope ra ting mode.
Re a der 001
3 LED
6d. Press ENTER;
Partition 1-8
XXXXXXXX
6e. Se lect the Re a der par ti tions (re fer to "Ena bling Par -
ti tions and A, B, C and D Mode" un der "Using the Key -
pad"), then press ENTER.
Yel.arm. 1-8
AAAAAAAA
6f. Set up the A Mode con fi gu ra tion for the Re a der con -
cer ned (re fer to "Ena bling Par ti tions and A, B, C and D
Mode" un der "Using the Key pad"), then press ENTER.
Gre en arm. 1-8
AAAAAAAA
6g. Set up the B Mode con fi gu ra tion for the Re a der con -
cer ned (re fer to "Ena bling Par ti tions and A, B, C and D
Mode" un der "Using the Key pad"), then press ENTER.
7. Press the A or B but tons to scroll thro ugh and pro -
gram the fol lo wing op tions: "View.contr. mem." (View
con trol unit alarm me mory), "View. Area.mem." (View
area alarm me mory) , "Comp EN50131" (Com pa ti bi lity
with EN50131), "Buz zerEntryTi me" (Buz zer du ring
entry time) and "Buz zer Exit Ti me" (Buz zer du ring Exit
time), then press ENTER and re turn to step 3.
1 M-IN/OUT expander programmed as Input Expander or Input/Output Expander (see "M-IN/OUT Programmable
Input/Output Expander" in the "INSTALLATION" chapter in Vol. 1).
2 M-IN/OUT expander programmed as Input Expander or Input/Output Expander (see "M-IN/OUT Programmable
Input/Output Expander" in the "INSTALLATION" chapter in Vol. 1).
KYO320
n Input Expanders
From the Con fi gu ra tion menu, using
Input Expan ders op tion.
Con fi gu ra tion

Input Expanders

1. Press ENTER;
Input Exp. n.001
InputExpander001
2.Using A or B, se lect the Input Expan der
gram med, then press ENTER.
De scrip tion
InputExpan der001
3. Enter the Input Expan der
text" un der "Using the Key pad"), then press ENTER.
InputExpan der001
Not pre sent
4. Press ON to en rol the Input Expan der
then press ENTER to con ti nue. To unen rol an Input
Expan der (de le te from the Con fi gu ra tion), press OFF.
5. To go back to the Con fi gu ra tion menu, press ESC.
n Output Expanders
From the Con fi gu ra tion menu, using A or B, se lect the
Out put Expan ders op tion.
Con fi gu ra tion
Out put Expanders
1. Press ENTER.
Output Exp.n.001
Expander out 001
2. Using A or B, se lect the Out put Expan der
gram med then press ENTER.
De scri ption
Expan der-out 001
3. Enter the Out put Expan der
texts" un der "Using the Key pad"), then press ENTER.
Expan der-out 001
Not present
4. Press ON to en rol the Out put Expan der
ENTER to con ti nue.
PROGRAM PANEL
1
A or B, se lect the
1
to be pro -
1
la bel (re fer to "Edi ting a
1
(Pre sent),
2
2
to be pro -
2
la bel (re fer to "Edi ting
2
, then press
19