About This Manual; Anatel ® Pat700 Analyzer Overview - Hach ANATEL PAT700 Operator's Manual

PAT700 Total Organic Carbon Analyzer – Before You Begin
Chapter 1 Before You Begin
1.1

About this manual

This instruction manual explains how to install and operate the Anatel
Carbon Analyzer.
•
•
•
•
•
•
•
•
•
•
•
•
•
1.2 Anatel
The Anatel
processing. The PAT700 oxidizes a water sample to determine the TOC in the sample. The
analyzer traps a sample in the analysis cell, exposes the sample to ultraviolet (UV) light, and
monitors changes in temperature and conductivity until the sample has completely oxidized.
Once full oxidation has occurred, the analyzer reports TOC, temperature, conductivity, the
oxidation curve type, and TOC trend. The PAT700 incorporates the OASIS™ onboard,
automated standards introduction system that simplifies analyzer performance testing using
standards bottles tagged with RFID technology.
Anatel
This chapter provides an overview of the PAT700 analyzer; explains your responsibility
for reading and following all instructions; explains safety procedures, cautions, and
warnings, which must be adhered to at all times; defines terms that are used
throughout this manual; and tells you how to contact customer service.
Chapter 2 explains how to install the analyzer and explains RS-232 commands.
Chapter 3 explains analyzer behavior at startup, how to sign on or sign off the
analyzer, and how to use the home screen to read Total Organic Carbon (TOC),
conductivity, and temperature.
Chapter 4 explains how to use the various analyzer run modes and how to select the
desired run mode.
Chapter 5 explains how to use the setup dialog box to navigate and change analyzer
settings.
Chapter 6 explains how to use bottles in the bottle bay to run calibrations, validations,
or system suitability tests; analyze samples from a bottle; install excursion bottles to
capture samples when TOC measurements exceed alarm limits; or schedule tests to
be run.
Chapter 7 explains alarm indications and how to acknowledge alarms, and provides
detailed listings and descriptions of all error codes.
Chapter 8 explains how to perform tests on the system to verify it is operating correctly.
Chapter 9 explains how to read, filter, and export historical sample data.
Chapter 10 explains how to enter or change passwords that provide data security for
the analyzer.
Chapter 11 explains maintenance and troubleshooting procedures for the analyzer.
Appendix A: provides specifications for the analyzer.
Appendix B is the CE attestation of conformity.
®
PAT700 analyzer overview
®
PAT700 analyzer provides TOC analysis for pure and ultra-pure water
Page 1
®
PAT700 Total Organic
Operator Manual