Page 72
The thermistor tab shows the read-only coefficient values for the thermistor.
Return icon
noted in the audit trail.
User slopes tab
TOC text box
after a TOC calibration has been performed.
Conductivity text box
value is updated after a conductivity calibration has been performed.
Return icon
noted in the audit trail.
Lamp tab
Operator Manual
returns you to the setup dialog box and saves the changes. Any changes are
Figure 5-28 Factory settings dialog box, user slopes tab
(read only) allows you to view the TOC calibration factor. This value is updated
(read only) allows you to view the conductivity calibration factor. This
returns you to the setup dialog box and saves the changes. Any changes are
Figure 5-29 Factory settings dialog box, lamp tab
Setup – PAT700 Total Organic Carbon Analyzer
Anatel