Excursion Without Validation - Hach ANATEL PAT700 Operator's Manual

Page 100
The excursion sample dialog box displays the analyzer's serial number, the date and time of
the excursion, the TOC value, and the oxidation curve filename.
Export icon
export the oxidation curve file to a USB flash drive.
Yes icon
Cancel icon

Excursion without validation

CAUTION
Potential puncture hazard! Contact with the exposed needle could cause serious
injury. Use extreme care when installing and removing the sample bottles.
1)
Operator Manual
opens the export sample dialog box. See
(containing checkmark) returns you to the load bottles dialog box.
takes you to the unload/replace bottles dialog box.
Install the standards bottles following the instructions as shown in the load bottles
dialog box and ensuring that you place the standards bottle in the correct position.
See Figure 6-29. From left:
• Bottle 1 = empty
• Bottle 2 = empty
• Bottle 3 = empty
• Bottle 4 = excursion bottle
Figure 6-29 Excursion mode without validation dialog box
• Bottle positions graphics
• Unlock icon energizes the bottle bay door lock for five seconds, allowing you to
open the door.
• Back icon takes you to the excursion mode dialog box.
• Forward icon takes you to the excursion mode setup dialog box.
Bottle Mode – PAT700 Total Organic Carbon Analyzer
Figure
show you where to install the bottle.
6-23. From there, you can
Anatel