Rs-232 Test - Hach ANATEL PAT700 Operator's Manual

Page 114

RS-232 test

The RS-232 test icon allows you to test serial communication from the serial port by using the
printer port as a return port. See
1)
2)
Start test icon
read data matches the sent data, the test passes.
Return icon
Operator Manual
Figure 8-4 Diagnostics dialog box, test tab
Disconnect the printer and RS-232 serial connections and connect a serial cable
between the analyzer's serial ports (from one serial port to the other).
Press the start test icon.
Figure 8-5 RS-232 test dialog box
sends serial data out one serial port and reads the data on the other. If the
returns you to the diagnostics dialog box.
Diagnostics – PAT700 Total Organic Carbon Analyzer
Figure 8-5.
Anatel