Alarms - Hach ANATEL PAT700 Operator's Manual
On-line total organic carbon analyzer
Hide thumbs
Also See for ANATEL PAT700:
- User manual (188 pages) ,
- User manual (62 pages) ,
- Basic user manual (192 pages)
Table of Contents
Advertisement
Page 53
Static subnet mask text box
of 0 to 255 for each octet. The default value is 255.255.255.0.
Static gateway text box
of 0 to 255 for each octet. The default value is blank.
DNS server text box
of 0 to 255 for each octet. The default value is blank.
WINS server text box
value of 0 to 255 for each octet. The default value is blank.
DHCP check box
subnet mask, and default gateway entries are disabled. The default setting is enabled.
Return icon
noted in the audit trail. All changes take effect immediately.
5.5
Alarms
The alarms icon allows you to enable or disable TOC and conductivity alarms for the system.
TOC upper limit text box
measurement. You may enter a value from 0 to 2000. The default value is 500. The value
applies only to online TOC analysis, not to bottle tests or grab sample analysis.
TOC enabled checkbox
any online TOC reading that exceeds the alarm upper limit triggers a TOC alarm. If disabled,
no TOC alarms are triggered. The default setting is enabled.
Conductivity enabled checkbox
enabled, any conductivity reading that exceeds the value in
temperature triggers a conductivity alarm. If disabled, no conductivity alarms are triggered.
The default setting is enabled.
Alarms are reported for conductivity excursions only in the uncompensated mode and require
that uncompensated conductivity be selected.
Operator Manual
sets the subnet mask for the analyzer. You may specify a value
sets the default gateway for the analyzer. You may specify a value
sets the DNS server address for the analyzer. You may specify a value
sets the WINS server address for the analyzer. You may specify a
allows you to enable or disable DHCP. When enabled, the TCP/IP address,
returns you to the setup dialog box and saves the changes. Any changes are
Figure 5-8 Alarm dialog box
allows you to set the alarm upper limit for online TOC
allows you to enable or disable the online TOC alarm. If enabled,
allows you to enable or disable the conductivity alarm. If
Setup – PAT700 Total Organic Carbon Analyzer
Table 5-1
for the current
Anatel
Advertisement
Table of Contents
Troubleshooting
