Startup Sequence; Logging On And Off - Hach ANATEL PAT700 Operator's Manual

PAT700 Total Organic Carbon Analyzer – Startup
Chapter 3 Startup
3.1

Startup sequence

The analyzer goes through the following sequence on power up:
1)
2)
3)
4)
5)
3.2

Logging on and off

The sign on and sign off icons enable you to sign on or sign off the analyzer. By default,
security is disabled and the user cannot sign on. To enable security, see
If you are signed on to the system, touching the sign off icon signs you off and changes the
icon to the sign on icon.
If no one is signed on to the system, touching the sign on icon causes the sign on dialog box
to appear. You then must enter your user ID and password. For more information about the
user ID and password, see
• If you are signed on remotely, you cannot be signed off locally.
• If you are signed on locally, you cannot be signed off by a remote user.
After you've signed on locally, the icon changes to the sign off icon. After you've signed on
remotely, the icon changes to indicate that someone is logged on remotely.
Anatel
Splash window: The splash window appears at startup while the system launches
the application.
Verify lamp monitor:
monitor works by turning on the main lamp and ensuring a voltage is returned.
Sample bottle check:
bay match the last known configuration. If the bottles contain RFID tags, the
analyzer reads the tags and compares them against the information stored in the
settings. If the RFID tag doesn't match what's stored in the settings, the settings are
updated with the new information and a warning is generated. If the settings list a
non-RFID tagged bottle in one of the bottle positions and an RFID tag cannot be
detected in that position, the analyzer assumes the bottle is still present.
Start sampling: If the analyzer is configured for online TOC, it starts sampling after
it has powered up.
Print header: After the system has started up, it prints a daily header.
Chapter
After the system has initialized, it verifies that the lamp
The system checks to see if the bottles loaded in the bottle
10.
Page 35
Security, page 59.
Operator Manual