Excursion With Validation - Hach ANATEL PAT700 Operator's Manual

PAT700 Total Organic Carbon Analyzer – Bottle Mode
•
•
•

Excursion with validation

CAUTION
Potential puncture hazard! Contact with the exposed needle could cause serious
injury. Use extreme care when installing and removing the sample bottles.
1)
Anatel
Figure 6-24 Excursion mode dialog box
Excursion with validation button
dialog box. See Figure 6-25
below.
Excursion without validation
validation and opens the excursion without validation load bottles dialog box. See
Figure 6-29 and follow the instructions in
Return icon returns you to the bottle mode dialog box.
Install the standards bottles following the instructions as shown in the load bottles
dialog box and ensuring that you place the standards bottle in the correct position.
See Figure 6-25. From left:
• Bottle 1 = blank
• Bottle 2 = empty
• Bottle 3 = 500 ppb sucrose
• Bottle 4 = excursion bottle
opens the excursion with validation load bottles
and follow the instructions in
button tells the analyzer to run the excursion without
Excursion without validation, page
Page 97
Excursion with validation,
100.
Operator Manual