Factory; General Tab - Hach ANATEL PAT700 Operator's Manual

Page 70
Current password
alphanumeric or symbol characters.
New password
same as any of the passwords in the password history list.
Confirm password
confirm password boxes must match.
• You may enter 5 to 15 alphanumeric or symbol characters in each text box.
• All three text boxes are case sensitive.
• All default values are blank.
• When you enter a character, only the "*" symbol appears for each key touch.
OK icon
in the audit trail. None of the passwords appears.
Cancel icon
are made in the audit trail.
5.11

Factory

The factory icon enables factory personnel to enter information that may not be changed by
other users. Information on the factory dialog boxes can be viewed by any user but can be
changed only by the administrator or a factory user.
Entry into the factory dialog box for the purpose of changing the settings requires entry of the
user ID and password. Touching the cancel icon enables read-only access to factory settings.
See

General tab

Model number text box
Serial number text box
Factory calibration date text
"yyyy-mm-dd" format.
Operator Manual
allows you to type your current password. You may enter 5 to 15
allows you to type your new password. The new password may not be the
allows you to retype your new password. Passwords in the password and
returns you to the sign on dialog box and saves the changes. All changes are noted
returns you to the sign on dialog box. All changes are discarded and no entries
Chapter 10.
Figure 5-25 Factory settings dialog box, general tab
displays the PAT700 model number.
displays the PAT700 serial number.
box displays the date of the last factory calibration in ISO
Setup – PAT700 Total Organic Carbon Analyzer
Anatel