Safety Precautions - LG AC Smart 5 Installation Manual

SAFETY PRECAUTIONS

2
SAFETY PRECAUTIONS
• This product must be installed by an installation professional from an LG authorized service
center.
• Any issues stemming from an installation by an unauthorized person is the responsibility of
the user and will not be covered by warranty.
• The following safety precautions are to prevent any unforeseen dangers or damage.
• This product has been designed for business use, or for areas outside the home, and has
passed the Electromagnetic Interference Test.
WARNING
!
It can result in serious injury or death when the directions are ignored.
CAUTION
!
It can result in minor injury or product damage when the directions are ignored.
WARNING
!
Installation
• To reinstall the product, please contact the dealer from where you purchased the product, or a service
center for reinstallation service.
- Installation of the product by an unauthorized person may result in fire, electric shock, explosion, injury,
or a malfunctioning of the product.
• Do not twist or damage the power cord.
- It may cause fire or electric shock.
• For electrical work, please contact the dealer from where you purchased the product, or a service
center.
- Disassembly or repair by an unauthorized person may result in fire or electric shock.
• Install the product in an area shielded from rain.
- If water gets into the product, it may malfunction.
• Do not install the product in a humid area.
- If the product is damp, it may malfunction.
• For installation of the product, please contact the dealer from where you purchased the product, or a
service center.
- Installation of the product by an unauthorized person may result in fire, electric shock, explosion, injury,
or a malfunctioning of the product.
• For electrical work, please have an electrician do the work based on the installation manual and specified
circuit diagram.
- Using an unsuitable cord, or having a non-professional work on the electricals may result in fire or
electrical shock.
• Do not place the product near a fire source.
- It may result in the product catching fire.
• If the product is installed in a hospital or a communication base station, provide sufficient protective
equipment against electrical noise.
- The product may malfunction or other products may work abnormally.
• Securely install the product.
- If the product is not secured during installation, it may fall or malfunction.
• Read the manual thoroughly to correctly install the product.
- If not, an incorrect installation may cause fire or electric shock.
• When wiring the product, do not use a non-standard cable, nor extend the cable excessively.
- It may cause a fire or electric shock.