To Connect Multiple Frames; To Install Measurement Modules; To Clean The Instrument - Agilent Technologies 16901A Service Manual

To connect multiple frames

To install measurement modules

To clean the instrument

16901A Logic Analysis System Service Guide
• Search for 16901A Logic Analysis System.
• Look under Technical Support and then Manuals and
Guides.
If you need to make time- correlated measurements with
more logic analysis channels than can be installed into a
single logic analysis system frame, you can connect multiple
16900A, 16901A, and 16902A frames together. Refer to the
Installation Guide that came with your instrument for
Multiframe Pro configurations. To get the most up- to- date
installation guide:
• Go to www.agilent.com.
• Search for 16901A Logic Analysis System.
• Look under Technical Support and then Manuals and
Guides.
For general information on installing a measurement module
into the mainframe refer to the Installation Guide that came
with your instrument. To get the most up- to- date
installation guide:
• Go to www.agilent.com.
• Search for 16901A Logic Analysis System.
• Look under Technical Support and then Manuals and
Guides.
If the instrument requires cleaning:
Remove power from the instrument.
1
Clean the external surfaces of the instrument with a soft
2
cloth dampened with a mixture of mild detergent and
water.
Make sure that the instrument is completely dry before
3
reconnecting it to a power source.
2
Preparing for Use
17