Remote Key Injection (Pkms) Initialisation - Ingenico iCT2XX Operating Manual

SKYZER TECHNOLOGIES
6.0
NII?
018
7.0
RKI
HOST IP ADDRESS
117.120.35.3
8.1
RKI
HOST IP ADDRESS
117.120.34.103
8.0
RKI
HOST PORT
7540
9.0
MULTI MERCHANT
SETUP

5.6.4 Remote Key Injection (PKMS) Initialisation

This function allows the Paymark security keys to be injected into the terminal
through the following steps below.
Step Terminal Display Description
1.0
2.0
FUNCTION?
3.0
RKI PASSWORD?
4.0
REMOTE INIT
IN PROGRESS
INGENICO ICT2XX PTS2018 PAYMARK OPERATING MANUAL
This parameter specifies the Network International Identifier that the terminal uses
to route messages to Paymark.
Press ENTER.
This parameter specifies the RKI HOST IP ADDRESS of Paymark, where it will be
connecting to download the keys. By default, the RKI (PKMS) Host IP Address is set
as 117.120.35.3.
For third Party SIM card configuration, the RKI HOPST IP ADDRESS of Paymark
would be 117.120.34.103. By default the RKI (PKMS) Host IP Address is set as
117.120.35.3.
This parameter specifies the RKI HOST PORT of the Paymark, where it will be
connecting to download the keys. By default, the RKI (PKMS) Host Port is set as
7540.
Terminal is now in configuration mode. Press CANCEL to exit, otherwise the
terminal will automatically exit after 30 seconds of inactivity
Press FUNC.
Key in 87 and press ENTER
Key in 6987 and press ENTER
Terminal starts to download remote keys into the terminal from the Paymark host.
PAGE 55 OF 147
Version 1.00