Table 5-2 Causes Of Errors For Job_Err - Siemens simatic et 200s Operating Instructions Manual

1PosSSI/Digital
5.6 Functions of the 1PosSSI/Digital
Causes of Errors for JOB_ERR
Table 5-2 Causes of Errors for JOB_ERR
Error Number Meaning
21 JOB unknown
23 ERR_ENCODER is displayed
26 JOB 2 (move encoder range) cannot be initiated
because there is an active run
33 With JOB 2: Offset not in encoder range
34 Setting an Actual Value: Actual value coordinates
≥ encoder range
35 Display current values: Selection unknown
36 Latch Function: Edge selection unknown
37 Display current values: JOB 15 cannot be
activated with the latch function running.
38 Monitoring of the direction of rotation
Path difference > 65 535
232
Remedy
Permissible JOBs are:
JOB 0
•
JOB 1
•
JOB 3
•
JOB 4
•
JOB 9
•
JOB 10
•
JOB 11
•
JOB 15
•
Check the encoder wiring
Operating Instructions, 05/2007, A5E00124871-04
ET 200S Positioning