Siemens simatic et 200s Operating Instructions Manual page 180

Hide thumbs Also See for simatic et 200s:

Table of Contents

1PosInc/Analog

4.8 Parameter List

Acceleration T

in ms Time required for a change in voltage

Deceleration T

in ms Time required for a change in voltage

via a ramp from 0 V to10 V.

At 0 ms acceleration is without a

via a ramp from 10 V to 0 V.

At 0 ms deceleration is without a

Operating Instructions, 05/2007, A5E00124871-04

Default setting

ET 200S Positioning